All Activity
- Past hour
-
win456itcom joined the community - Today
-
KRCLUB 2 joined the community -
Jevd Gsjxv changed their profile photo -
Ev99cx joined the community -
00:00.0 8086:3e30 /PCI0@0/pci8086,3e30@0 = PciRoot(0x0)/Pci(0x0,0x0) 00:01.0 8086:1901 /PCI0@0/PEG0@1 = PciRoot(0x0)/Pci(0x1,0x0) 00:14.0 8086:a36d /PCI0@0/XHC@14 = PciRoot(0x0)/Pci(0x14,0x0) 00:14.2 8086:a36f /PCI0@0/pci8086,a36f@14,2 = PciRoot(0x0)/Pci(0x14,0x2) 00:16.0 8086:a360 /PCI0@0/HECI@16 = PciRoot(0x0)/Pci(0x16,0x0) 00:17.0 8086:a352 /PCI0@0/SAT0@17 = PciRoot(0x0)/Pci(0x17,0x0) 00:1b.0 8086:a340 /PCI0@0/RP17@1B = PciRoot(0x0)/Pci(0x1B,0x0) 00:1b.4 8086:a32c /PCI0@0/RP21@1B,4 = PciRoot(0x0)/Pci(0x1B,0x4) 00:1c.0 8086:a338 /PCI0@0/RP01@1C = PciRoot(0x0)/Pci(0x1C,0x0) 00:1d.0 8086:a330 /PCI0@0/RP09@1D = PciRoot(0x0)/Pci(0x1D,0x0) 00:1f.0 8086:a305 /PCI0@0/LPCB@1F = PciRoot(0x0)/Pci(0x1F,0x0) 00:1f.3 8086:a348 /PCI0@0/HDEF@1F,3 = PciRoot(0x0)/Pci(0x1F,0x3) 00:1f.4 8086:a323 /PCI0@0/SBUS@1F,4 = PciRoot(0x0)/Pci(0x1F,0x4) 00:1f.5 8086:a324 /PCI0@0/pci8086,a324@1F,5 = PciRoot(0x0)/Pci(0x1F,0x5) 00:1f.6 8086:15bc /PCI0@0/GLAN@1F,6 = PciRoot(0x0)/Pci(0x1F,0x6) 01:00.0 1002:1478 /PCI0@0/PEG0@1/PEGP@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) 05:00.0 144d:a804 /PCI0@0/RP21@1B,4/PXSX@0 = PciRoot(0x0)/Pci(0x1B,0x4)/Pci(0x0,0x0) 07:00.0 1987:5018 /PCI0@0/RP09@1D/PXSX@0 = PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0) 02:00.0 1002:1479 /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) 03:00.0 1002:73df /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/GFX0@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) 03:00.1 1002:ab28 /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/HDAU@0,1 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1) so i updated the acpi with as per above suggestion /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/GFX0@0 SSDT-BRG0-GFX0.aml SSDT-sPPT.aml
-
Don't rant, I know this is off topic. I have a problem with the "Download Full Installer" app. A download of 15.7.1 stopped at 16 GB, and now my macOS partition only shows 26 GB because the downloaded 16 GB is still taking up space. Question: Where does the "Download Full Installer" save the downloads? I go to Users/Library/Application Support and I don't see anything about the "Download Full Installer." Thanks for the quick tip. I want to install 15.7.1 Sequoia on another Mac today. Thanks for the unfriendly non-help... but I found it myself ?
- Yesterday
-
Sorry @MaLd0n Still the same issue with the above EFI. Exactly the same problem. I am beginning to think this generation of chipset has trouble with > 16GB (which is not logical). Same happens when trying with Sonoma. I will try upgrading from Ventura using the Apple package but it is really a concern if I don't have a back up boot USB.
-
You dont need to rename anything Put Xcode 16 in a folder like this Open Applications Xcode 26 ? Settings ? Locations ? Command Line Tools ? Choose the Xcode 16.4 (16F6) You can change to Xcode 26 anytime
-
Yes my friend, is another way to do it !! Nice shot!! You can have many Xcode installed, just renamed correctly
-
I also ordered the same wifi chip but i still hesitate because of AirDrop, but i will try as soon as chip arrives -
Tim OBrien joined the community -
Tyler Doelle joined the community -
Shine Khan joined the community -
I came up with another way. I just renamed it to Xcode16.4 and before compilation I rename the required one in Xcode.
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
I need my hackbook in the next few days to process the pressing items on my to-do list. Once that's done I can tackle the update.
-
Works? If yes, enjoy it
-
Gotcha @Max.1974 ?
-
Hi @BuXb With VoodooHDA, there’s no need to remove it — just reinstall the patch if it’s not recognized, but it usually doesn’t lose functionality. If necessary, simply run the installation script again. You can use this commands from Terminal after upgrade: sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / sudo kextutil -v /Library/Extensions/VoodooHDA.kext sudo kextload /Library/Extensions/VoodooHDA.kext After reboot you can test: log show --last boot | grep -i voodoo One by One
-
Anybody here already updated to 26.0.1? If so, did you have to remove VoodooHDA from /L/E/ for the update to run through, or could it remain?
-
@Austere.J and/or anyone else that tested the kext in Tahoe: will the kext work in Tahoe with VT-D enabled in BIOS but patching the DMAR table to remove reserved regions and dropped the original DMAR table as explained in Dortania. Right now, that's the only way my i-225V ethernet card works in Tahoe. AppleIGC kext does not work in Tahoe with VT-D enabled in BIOS. -
For me works disable this two toggles :
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
frogmouthclothing com die web joined the community -
Everything came together perfectly but buildme was never fixed and I remain on my semi-synchronized branch. Thanks everyone.
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
Thanks my good freind ? Really appreciate that you taking time You can use any script you want thats not a probleme, I just clarified simply how to for the newbie.
- 30,479 replies
-
- 2
-
-
-
- bootloader
- efi
- (and 2 more)
-
Thank you very much. I'm already downloading it, but how can I prevent it from updating? So far I can say that it builds with Python 3.13.7 + Xcode_26.0.1 and Python 3.9 + Xcode_15.3 ?
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
Ruben Mendizabal joined the community -
I think we are not ready for this yet... in the meantime I disabled the card from the bios ? and restored the config.
- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
5MB EMAIL changed their profile photo -
The one thing I am apprehensive about is the possibility of AirDrop not working as reported hence the reason I was holding off. Having Wi-Fi working on the others in the system and not Tahoe, twisted my arm to go this route.- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I'm sure it works for you. We tried it with a user on macOS86 with BCM943602CS ( mine is BCM4350 0x14E4, 0x43A3 ? ) and it worked... we need to solve the LAN problem.
- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
If you trust me, this file is the zip downloaded directly from Apple’s developer website. If you can’t access it: https://www.mediafire.com/file/it564ypd8q5wava/Xcode_16.4-melhor.xip/file
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
maybe you'll have to walk the debug way? DW1820A should be supported... I also used a DW1820A in the past, and I remember that my card was so problematic: sometimes it was somehow "blocked" and only worked again after I completely turned off the power to my laptop (with also disconnecting the battery) - doesn't mean that this could be the case for you- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I am in the process of trying this to get WIFI on Tahoe. I have ordered a supposedly compatible BCM943602CS Card and PCIe adapter. I am hoping after putting it all together, it will be just a matter of plug and play like the Fenvi. I made a promise I wouldn't spend any unnecessary money on the Hack being as this is the last macOS for us but here we are.
- 98 replies
-
- 2
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I checked everything four times and found no errors or warnings. I was unable to obtain Xcode 16 legally. Thank you and good luck! Official instructions: Build Clover on macOS Tahoe 26 from scratch. ? Install Xcode 26 or Xcode 16, Make sure you open Xcode then Install additional required components. ? Install Python 3.11.5 or Python 3.13.7 [?] ?? Clone and Build Clover rm -rf ~/src mkdir -p ~/src cd ~/src git clone https://github.com/CloverHackyColor/CloverBootloader.git cd ~/src/CloverBootloader && ./buildme buildme Option:?? 1 build Clover (Default Toolchain) 2 make pkg No other methods are discussed or supported by the authors and no claims will be accepted.
-
Setting DisableIoMapper to true disables AppleVTD. (But AppleVTD is required for the Intel i225-V ethernet DriverKit, although there’s a workaround for this - using the old AppleIntelI210Ethernet.kext from Monterey.) So can you confirm if you have AppleVTD enabled (you can check in the IORegistryExplorer) and working Wi-Fi in Sequoia at the same time? Is this issue only affecting Tahoe?
